<?xml version="1.0" encoding="UTF-8"?>
<RECIPES>
 <RECIPE>
  <NAME>Leichtbier (AG) 23L</NAME>
  <VERSION>1</VERSION>
  <TYPE>All Grain</TYPE>
  <BREWER>LoB kits</BREWER>
  <DISPLAY_BATCH_SIZE>23 L</DISPLAY_BATCH_SIZE>
  <DISPLAY_BOIL_SIZE>29.15 L</DISPLAY_BOIL_SIZE>
  <BATCH_SIZE>23</BATCH_SIZE>
  <BOIL_SIZE>29.15</BOIL_SIZE>
  <BOIL_TIME>90</BOIL_TIME>
  <EFFICIENCY>75</EFFICIENCY>
  <NOTES>The suggested mineral additions assume an average NZ water profile and should be fine for most NZ water sources. The target (balanced) water profile in ppm is shown above.&#13;
&#13;
1.This recipe is designed to include mineral additions in the mash. If you do not have scales, 1 flat tsp/4g each of gypsum and calcium chloride will be a close approximation. The mineral additions are designed to target an optimal mash pH of ~5.2 without the need for larger amounts of acidulated malt. Calcium is also essential for stabilising mash enzymes and for yeast health. The mineral additions are also very important for the flavour profile of the beer. If you do not have brewing salts in your home brewery, they are available for purchase on the LoB website and will last a great many brews for a small cost.&#13;
&#13;
2. If you wish (particularly if your system requires excessive sparging, below SG 1.012), add sufficient lactic acid to the sparge water to lower the pH to 5.6 prior to heating (~ 0.5 - 1.0 ml/10l lactic acid depending on water source).&#13;
&#13;
3.  We recommend you add kettle finings (whirlflock, Irish Moss) and yeast nutrient 15 min before the end of boil.&#13;
    &#13;
4. Cool the wort to 12C and promptly transfer to a fermenter. &#13;
(you will likely need to finish cooling in your fermenter/fridge).&#13;
&#13;
5. We strongly recommend that the yeast be rehydrated in sterile warm water per the manufacturer’s instructions. If not, you may lose up to 50% cell viability. This kit includes 3 packets of yeast. Use them all as this is required for an adequate lager pitch rate. Pitch into well aerated/oxygenated wort at 12 deg C and ferment at this temperature until complete. Expect this to take around 2 weeks for the beer to finish properly. It is always important not to rush the beer. While it shouldn't be necessary if the pitch rate and fermentation guidelines are followed, some brewers may choose to slowly raise the beer temperature by 2-3 degrees towards the end of the ferment (diacetyl rest), especially if you have had any issues with an unhealthy ferment/have performed a sensory test and picked up diacetly. If you do this, we recommend you give the beer plenty of time (6-7 days rest) at these cooler temperatures. &#13;
&#13;
6. When the primary ferment is complete, lager at 2 deg C for 2-4 weeks for a smooth lager finish. A keg is perfect for this.&#13;
When ready, rack the beer to a CO2 purged keg (finings can be added if needed) and force carbonate to around 2.5 vols CO2. </NOTES>
  <EST_COLOR>3.06</EST_COLOR>
  <IBU>19.74</IBU>
  <IBU_METHOD>Tinseth</IBU_METHOD>
  <EST_ABV>3.45</EST_ABV>
  <EST_OG>1.033 sg</EST_OG>
  <EST_FG>1.007 sg</EST_FG>
  <OG>1.033</OG>
  <FG>1.007</FG>
  <PRIMING_SUGAR_NAME></PRIMING_SUGAR_NAME>
  <CARBONATION_USED></CARBONATION_USED>
  <CARBONATION>2.35</CARBONATION>
  <BF_PRIMING_METHOD></BF_PRIMING_METHOD>
  <BF_PRIMING_AMOUNT></BF_PRIMING_AMOUNT>
  <BF_CO2_LEVEL>2.35</BF_CO2_LEVEL>
  <BF_CO2_UNIT>Volumes</BF_CO2_UNIT>
  <URL></URL>
  <BATCH_SIZE_MODE>f</BATCH_SIZE_MODE>
  <YEAST_STARTER>false</YEAST_STARTER>
  <NO_CHILL_EXTRA_MINUTES></NO_CHILL_EXTRA_MINUTES>
  <STARTING_MASH_THICKNESS>2.7</STARTING_MASH_THICKNESS>
  <PITCH_RATE>0.35</PITCH_RATE>
  <FERMENTABLES>
   <FERMENTABLE>
    <NAME>DE - Bestmalz - BEST Pilsen</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>3</AMOUNT>
    <YIELD>80</YIELD>
    <COLOR>2</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>Germany</ORIGIN>
    <DIASTATIC_POWER>250</DIASTATIC_POWER>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>NZ - Gladfield - Gladiator Malt</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>0.15</AMOUNT>
    <YIELD>82</YIELD>
    <COLOR>3.25</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>New Zealand</ORIGIN>
    <DIASTATIC_POWER>0</DIASTATIC_POWER>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>NZ - Gladfield - Toffee Malt</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>0.15</AMOUNT>
    <YIELD>73.91</YIELD>
    <COLOR>7.7</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>New Zealand</ORIGIN>
    <DIASTATIC_POWER>0</DIASTATIC_POWER>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>NZ - Gladfield - Sour Grapes Acid Malt</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>0.1</AMOUNT>
    <YIELD>26.09</YIELD>
    <COLOR>2</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>New Zealand</ORIGIN>
    <DIASTATIC_POWER>0</DIASTATIC_POWER>
   </FERMENTABLE>
  </FERMENTABLES>
  <HOPS>
   <HOP>
    <NAME>Hallertau Mittelfruh</NAME>
    <VERSION>1</VERSION>
    <ALPHA>3.75</ALPHA>
    <AMOUNT>0.03</AMOUNT>
    <USE>Boil</USE>
    <USER_HOP_USE>Boil</USER_HOP_USE>
    <TIME>90</TIME>
    <FORM>Pellet</FORM>
   </HOP>
   <HOP>
    <NAME>Hallertau Mittelfruh</NAME>
    <VERSION>1</VERSION>
    <ALPHA>3.75</ALPHA>
    <AMOUNT>0.02</AMOUNT>
    <USE>Boil</USE>
    <USER_HOP_USE>Boil</USER_HOP_USE>
    <TIME>10</TIME>
    <FORM>Pellet</FORM>
   </HOP>
  </HOPS>
  <MISCS>
   <MISC>
    <NAME>Calcium Chloride (dihydrate)</NAME>
    <VERSION>1</VERSION>
    <TYPE>Water Agent</TYPE>
    <USE>Mash</USE>
    <TIME>60</TIME>
    <AMOUNT>0.004</AMOUNT>
    <AMOUNT_IS_WEIGHT>TRUE</AMOUNT_IS_WEIGHT>
   </MISC>
   <MISC>
    <NAME>Gypsum</NAME>
    <VERSION>1</VERSION>
    <TYPE>Water Agent</TYPE>
    <USE>Mash</USE>
    <TIME>60</TIME>
    <AMOUNT>0.002</AMOUNT>
    <AMOUNT_IS_WEIGHT>TRUE</AMOUNT_IS_WEIGHT>
   </MISC>
  </MISCS>
  <MASH>
   <NAME>Mash Steps</NAME>
   <VERSION>1</VERSION>
   <GRAIN_TEMP>20</GRAIN_TEMP>
   <MASH_STEPS>
    <MASH_STEP>
     <NAME></NAME>
     <VERSION>1</VERSION>
     <TYPE>Infusion</TYPE>
     <STEP_TIME>60</STEP_TIME>
     <INFUSE_AMOUNT>9.2</INFUSE_AMOUNT>
     <STEP_TEMP>66</STEP_TEMP>
    </MASH_STEP>
    <MASH_STEP>
     <NAME></NAME>
     <VERSION>1</VERSION>
     <TYPE>Infusion</TYPE>
     <STEP_TIME></STEP_TIME>
     <INFUSE_AMOUNT>23.4</INFUSE_AMOUNT>
     <STEP_TEMP>78</STEP_TEMP>
    </MASH_STEP>
   </MASH_STEPS>
  </MASH>
  <YEASTS>
   <YEAST>
    <NAME>Diamond Lager Yeast</NAME>
    <VERSION>1</VERSION>
    <TYPE>Lagers</TYPE>
    <FORM>Dry</FORM>
    <AMOUNT>0.33</AMOUNT>
    <AMOUNT_IS_WEIGHT>TRUE</AMOUNT_IS_WEIGHT>
    <PRODUCT_ID></PRODUCT_ID>
    <LABORATORY>Lallemand</LABORATORY>
    <ATTENUATION>77</ATTENUATION>
    <FLOCCULATION>Low</FLOCCULATION>
    <MIN_TEMPERATURE>18</MIN_TEMPERATURE>
    <MAX_TEMPERATURE>25</MAX_TEMPERATURE>
   </YEAST>
  </YEASTS>
  <WATERS>
   <WATER>
    <NAME>Light colored and malty</NAME>
    <VERSION>1</VERSION>
    <AMOUNT>23</AMOUNT>
    <CALCIUM>65</CALCIUM>
    <BICARBONATE>0.3</BICARBONATE>
    <SULFATE>44</SULFATE>
    <CHLORIDE>74</CHLORIDE>
    <SODIUM>10</SODIUM>
    <MAGNESIUM>3</MAGNESIUM>
    <NOTES></NOTES>
   </WATER>
  </WATERS>
  <STYLE>
   <NAME>German Leichtbier</NAME>
   <VERSION>1</VERSION>
   <CATEGORY>Pale Bitter European Beer</CATEGORY>
   <CATEGORY_NUMBER>5</CATEGORY_NUMBER>
   <STYLE_LETTER>A</STYLE_LETTER>
   <STYLE_GUIDE>BJCP</STYLE_GUIDE>
   <TYPE>Lager</TYPE>
   <OG_MIN>1.026</OG_MIN>
   <OG_MAX>1.034</OG_MAX>
   <FG_MIN>1.006</FG_MIN>
   <FG_MAX>1.01</FG_MAX>
   <ABV_MIN>2.4</ABV_MIN>
   <ABV_MAX>3.6</ABV_MAX>
   <IBU_MIN>15</IBU_MIN>
   <IBU_MAX>28</IBU_MAX>
   <COLOR_MIN>2</COLOR_MIN>
   <COLOR_MAX>5</COLOR_MAX>
  </STYLE>
 </RECIPE>
</RECIPES>
