<?xml version="1.0" encoding="UTF-8"?>
<RECIPES>
 <RECIPE>
  <NAME>The Doppler Effect. Doppelbock (AG) 23 L</NAME>
  <VERSION>1</VERSION>
  <TYPE>All Grain</TYPE>
  <BREWER>LoB kits</BREWER>
  <DISPLAY_BATCH_SIZE>23 L</DISPLAY_BATCH_SIZE>
  <DISPLAY_BOIL_SIZE>28.5 L</DISPLAY_BOIL_SIZE>
  <BATCH_SIZE>23</BATCH_SIZE>
  <BOIL_SIZE>28.5</BOIL_SIZE>
  <BOIL_TIME>90</BOIL_TIME>
  <EFFICIENCY>70</EFFICIENCY>
  <NOTES>The suggested mineral additions assume an average NZ water profile and should be fine for most NZ water sources.  The target water profile in ppm is shown above.&#13;
&#13;
Advanced note: We strongly encourage the use of a decoction mash as it is traditionally used in the brewing of a Dopplebock and will help bring out the bready and rich malty flavours. There are a number of approaches available, some more complicated than others, but for the slightly more adventurous brewer a simple double decoction can be added to the mash schedule as follows. 15-20 minutes protein rest (50 deg C), then pull a thick mash sample (approximately 1/3 of the mash without lots of the liquor and enzymes) and heat in a separate vessel to 68 deg C (there is no need to raise the temperature of the main mash yet). Hold the decoction at 68 deg C for 20 min and then bring it to the boil. Gently boil the mash for 15 min, stiring regularly to avoid excessive scorching. Taking great care to avoid burns, slowly return the decoction to the main mash raising the temperature to 68 deg C (for 1 hour). Any remaining decoction volume can be left to cool some more before returning to the main mash. At the end of the main  68 deg C infusion, pull a wet mash sample (1/3 of the mash with plenty of liquor) and bring it to the boil. Carefully return the boiled mash to the main mash, raising the temperature to mash out. Note that if you choose to incorporate a decoction mash, be prepared to need additional sparge water due to evaporative losses during the boiling phase. This will likely help improve the efficiency of this high gravity brew. &#13;
&#13;
1. This recipe is designed to include mineral additions in the mash. If you do not have scales, 1 flat tsp/4g of calcium chloride will be a close approximation. The mineral additions are designed to target a mash pH of ~5.4. Calcium is also essential for stabilising mash enzymes and for yeast health. The mineral additions are also very important for the flavour profile of the beer. If you do not have brewing salts in your home brewery, they are available for purchase on the LoB website and will last a great many brews for a small cost.&#13;
&#13;
2. If you wish (particularly if your system requires excessive sparging, below SG 1.012 which is unlikely for this higher gravity beer), add sufficient lactic acid to the sparge water to lower the pH to 5.6 prior to heating (~ 0.5 - 1.0 ml/10l lactic acid depending on water source).&#13;
&#13;
3. We recommend you add kettle finings (whirlflock, Irish Moss) and yeast nutrient 15 min before the end of boil.&#13;
&#13;
4. Cool the wort to 12 deg C and promptly transfer to a fermenter (you will likely need to finish cooling in your fermenter fridge).&#13;
&#13;
5. We strongly recommend that the yeast be rehydrated in sterile warm water per the manufacturer’s instructions. If not, you may lose up to 50% cell viability. Pitch all of the provided yeast (this is a high gravity lager and definitely needs it) into well aerated wort at 12 deg C and ferment at this temperature until complete. Expect this to take around 2 weeks for the beer to finish properly. It is always important not to rush the beer. While it shouldn't be necessary if the pitch rate and fermentation guidelines are followed, some brewers may choose to slowly raise the beer temperature by 2-3 degrees towards the end of the ferment (diacetyl rest), especially if you have had any issues with an unhealthy ferment/have performed a sensory test and picked up diacetly. If you do this, we recommend you give the beer plenty of time (6-7 days rest) at these cooler temperatures.&#13;
&#13;
6. When the primary ferment is complete, lager at 2 deg C for 4-6 weeks for a smooth lager finish. A keg is perfect for this. &#13;
&#13;
7. When ready, rack the beer to a CO2 purged keg (finings can be added if needed) and force carbonate to around 2.4 vols CO2.&#13;
</NOTES>
  <EST_COLOR>21.62</EST_COLOR>
  <IBU>20.21</IBU>
  <IBU_METHOD>Tinseth</IBU_METHOD>
  <EST_ABV>7.74</EST_ABV>
  <EST_OG>1.072 sg</EST_OG>
  <EST_FG>1.013 sg</EST_FG>
  <OG>1.072</OG>
  <FG>1.013</FG>
  <PRIMING_SUGAR_NAME>co2</PRIMING_SUGAR_NAME>
  <CARBONATION_USED>co2 0.74 bar</CARBONATION_USED>
  <CARBONATION>2.4</CARBONATION>
  <BF_PRIMING_METHOD>co2</BF_PRIMING_METHOD>
  <BF_PRIMING_AMOUNT>0.74 bar</BF_PRIMING_AMOUNT>
  <BF_CO2_LEVEL>2.4</BF_CO2_LEVEL>
  <BF_CO2_UNIT>Volumes</BF_CO2_UNIT>
  <URL></URL>
  <BATCH_SIZE_MODE>f</BATCH_SIZE_MODE>
  <YEAST_STARTER>false</YEAST_STARTER>
  <NO_CHILL_EXTRA_MINUTES></NO_CHILL_EXTRA_MINUTES>
  <STARTING_MASH_THICKNESS>2.7</STARTING_MASH_THICKNESS>
  <PITCH_RATE>1.5</PITCH_RATE>
  <FERMENTABLES>
   <FERMENTABLE>
    <NAME>NZ - Gladfield - Pilsner Malt</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>4.9</AMOUNT>
    <YIELD>77.5</YIELD>
    <COLOR>1.9</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>New Zealand</ORIGIN>
    <DIASTATIC_POWER>250</DIASTATIC_POWER>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>NZ - Gladfield - Vienna Malt</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>1.5</AMOUNT>
    <YIELD>77</YIELD>
    <COLOR>3.48</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>New Zealand</ORIGIN>
    <DIASTATIC_POWER>210</DIASTATIC_POWER>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>DE - Weyermann - Munich Type II (Dark)</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>1</AMOUNT>
    <YIELD>78</YIELD>
    <COLOR>9</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>Germany</ORIGIN>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>DE - Wyeyermann - Carafa Special Type II</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>0.2</AMOUNT>
    <YIELD>65</YIELD>
    <COLOR>525</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>Germany</ORIGIN>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>NZ - Gladfield - Aurora Malt</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>0.3</AMOUNT>
    <YIELD>78</YIELD>
    <COLOR>23</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>New Zealand</ORIGIN>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>NZ - Gladfield - Sour Grapes Acid Malt</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>0.2</AMOUNT>
    <YIELD>26.09</YIELD>
    <COLOR>2</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>New Zealand</ORIGIN>
   </FERMENTABLE>
  </FERMENTABLES>
  <HOPS>
   <HOP>
    <NAME>HA Hersbrucker</NAME>
    <VERSION>1</VERSION>
    <ALPHA>4.6</ALPHA>
    <AMOUNT>0.04</AMOUNT>
    <USE>Boil</USE>
    <USER_HOP_USE>Boil</USER_HOP_USE>
    <TIME>90</TIME>
    <FORM>Pellet</FORM>
   </HOP>
  </HOPS>
  <MISCS>
   <MISC>
    <NAME>Calcium Chloride (dihydrate)</NAME>
    <VERSION>1</VERSION>
    <TYPE>Water Agent</TYPE>
    <USE>Mash</USE>
    <TIME>60</TIME>
    <AMOUNT>0.002</AMOUNT>
    <AMOUNT_IS_WEIGHT>TRUE</AMOUNT_IS_WEIGHT>
   </MISC>
   <MISC>
    <NAME>Gypsum</NAME>
    <VERSION>1</VERSION>
    <TYPE>Water Agent</TYPE>
    <USE>Mash</USE>
    <TIME>60</TIME>
    <AMOUNT>0.002</AMOUNT>
    <AMOUNT_IS_WEIGHT>TRUE</AMOUNT_IS_WEIGHT>
   </MISC>
  </MISCS>
  <MASH>
   <NAME>Mash Steps</NAME>
   <VERSION>1</VERSION>
   <GRAIN_TEMP>20</GRAIN_TEMP>
   <MASH_STEPS>
    <MASH_STEP>
     <NAME>Starch coversion. </NAME>
     <VERSION>1</VERSION>
     <TYPE>Infusion</TYPE>
     <STEP_TIME>60</STEP_TIME>
     <INFUSE_AMOUNT>22</INFUSE_AMOUNT>
     <STEP_TEMP>68</STEP_TEMP>
    </MASH_STEP>
    <MASH_STEP>
     <NAME>Mash out</NAME>
     <VERSION>1</VERSION>
     <TYPE>Temperature</TYPE>
     <STEP_TIME>10</STEP_TIME>
     <INFUSE_AMOUNT></INFUSE_AMOUNT>
     <STEP_TEMP>77</STEP_TEMP>
    </MASH_STEP>
    <MASH_STEP>
     <NAME></NAME>
     <VERSION>1</VERSION>
     <TYPE>Infusion</TYPE>
     <STEP_TIME></STEP_TIME>
     <INFUSE_AMOUNT>14.6</INFUSE_AMOUNT>
     <STEP_TEMP></STEP_TEMP>
    </MASH_STEP>
   </MASH_STEPS>
  </MASH>
  <YEASTS>
   <YEAST>
    <NAME>Saflager - German Lager Yeast W-34/70</NAME>
    <VERSION>1</VERSION>
    <TYPE>Lagers</TYPE>
    <FORM>Dry</FORM>
    <AMOUNT>0.55</AMOUNT>
    <AMOUNT_IS_WEIGHT>TRUE</AMOUNT_IS_WEIGHT>
    <PRODUCT_ID>W-34/70</PRODUCT_ID>
    <LABORATORY>Fermentis / Safale</LABORATORY>
    <ATTENUATION>83</ATTENUATION>
    <FLOCCULATION>High</FLOCCULATION>
    <MIN_TEMPERATURE>8.8888888888889</MIN_TEMPERATURE>
    <MAX_TEMPERATURE>22.222222222222</MAX_TEMPERATURE>
   </YEAST>
  </YEASTS>
  <WATERS>
   <WATER>
    <NAME>Munich (decarbonated)</NAME>
    <VERSION>1</VERSION>
    <AMOUNT>23</AMOUNT>
    <CALCIUM>40</CALCIUM>
    <BICARBONATE>0</BICARBONATE>
    <SULFATE>40</SULFATE>
    <CHLORIDE>36.5</CHLORIDE>
    <SODIUM>10</SODIUM>
    <MAGNESIUM>3</MAGNESIUM>
    <NOTES></NOTES>
   </WATER>
  </WATERS>
  <STYLE>
   <NAME>Doppelbock</NAME>
   <VERSION>1</VERSION>
   <CATEGORY>Strong European Beer</CATEGORY>
   <CATEGORY_NUMBER>9</CATEGORY_NUMBER>
   <STYLE_LETTER>A</STYLE_LETTER>
   <STYLE_GUIDE>BJCP</STYLE_GUIDE>
   <TYPE>Lager</TYPE>
   <OG_MIN>1.072</OG_MIN>
   <OG_MAX>1.112</OG_MAX>
   <FG_MIN>1.016</FG_MIN>
   <FG_MAX>1.024</FG_MAX>
   <ABV_MIN>7</ABV_MIN>
   <ABV_MAX>10</ABV_MAX>
   <IBU_MIN>16</IBU_MIN>
   <IBU_MAX>26</IBU_MAX>
   <COLOR_MIN>6</COLOR_MIN>
   <COLOR_MAX>25</COLOR_MAX>
  </STYLE>
 </RECIPE>
</RECIPES>
