<?xml version="1.0" encoding="UTF-8"?>
<RECIPES>
 <RECIPE>
  <NAME>Up In Smoke. Rauchbier (AG) 23L</NAME>
  <VERSION>1</VERSION>
  <TYPE>All Grain</TYPE>
  <BREWER>LoB Kits</BREWER>
  <DISPLAY_BATCH_SIZE>23 L</DISPLAY_BATCH_SIZE>
  <DISPLAY_BOIL_SIZE>28.3 L</DISPLAY_BOIL_SIZE>
  <BATCH_SIZE>23</BATCH_SIZE>
  <BOIL_SIZE>28.3</BOIL_SIZE>
  <BOIL_TIME>60</BOIL_TIME>
  <EFFICIENCY>75</EFFICIENCY>
  <NOTES>The suggested mineral additions assume an average NZ water profile and should be fine for most NZ water sources. The target (balanced) water profile in ppm is shown above.&#13;
&#13;
Advanced note: we suggest that you incorporate a decoction mash is which traditionally used in the brewing of a Marzen, the style which provides the foundations upon which a Rauchbier is created. This method will help bring out the bready malty flavours. There are a number of approaches available, some more complicated than others, but for the slightly more adventurous brewer a simple double decoction can be added to the mash schedule as follows. 20 minutes protein rest (50 deg C), then pull a thick mash sample (approximately 1/3 of the mash without lots of the liquor and enzymes) and heat in a separate vessel to 67 deg C (there is no need to raise the temperature of the main mash yet). Hold the decoction at 67 deg C for 20 min and then bring it to the boil. Slowly return the decoction to the main mash raising the temperature to 67 deg C (for 1 hour). Any remaining decoction volume can be left to cool some more before returning to the main mash. At the end of the main  67 deg C infusion, pull a wet mash sample (1/3 of the mash with plenty of liquor) and bring it to the boil. Carefully return the boiled mash to the main mash, raising the temperature to mash out. &#13;
&#13;
1. This recipe is designed to include mineral additions in the mash. If you do not have scales, 1 flat tsp/4g of calcium chloride will be a close approximation. The mineral additions are designed to target an optimal mash pH of ~5.3. Calcium is also essential for stabilising mash enzymes and for yeast health. The mineral additions are also very important for the flavour profile of the beer. If you do not have brewing salts in your home brewery, they are available for purchase on the LoB website and will last a great many brews for a small cost.&#13;
2. If you wish (particularly if your system requires excessive sparging, below SG 1.012), add sufficient lactic acid to the sparge water to lower the pH to 5.6 prior to heating (~ 0.5 - 1.0 ml/10l lactic acid depending on water source).&#13;
3. We recommend you add kettle finings (whirlflock, Irish Moss) and yeast nutrient 15 min before the end of boil.&#13;
4. Cool the wort to 12 deg C and promptly transfer to a fermenter (you will likely need to finish cooling in your fermenter fridge).&#13;
5. We strongly recommend that the yeast be rehydrated in sterile warm water per the manufacturer’s instructions. If not, you may lose up to 50% cell viability. Use all three packs provided for a healthy lager pitch (1.5 x cell count required for a lager). Pitch into well aerated wort at 12 deg C and ferment at this temperature until complete. Expect this to take&#13;
around 1 week for the beer to finish. It is always important not to rush the beer. Giving the beer another week at primary fermentation temperature is always a good idea. While it shouldn't be necessary if the pitch rate and fermentation guidelines are followed, some brewers may choose to slowly raise the beer temperature by 2-3&#13;
degrees towards the end of the ferment (diacetyl rest), especially if you have had any issues with an unhealthy ferment/have&#13;
performed a sensory test and picked up diacetly. If you do this, we recommend you give the beer plenty of time (2-3 days rest).&#13;
&#13;
6. When ready, rack the beer to a CO2 purged keg (finings can be added if needed) and force carbonate to around 2.7 vols CO2. </NOTES>
  <PRIMARY_TEMP>12</PRIMARY_TEMP>
  <EST_COLOR>11.99</EST_COLOR>
  <IBU>32.96</IBU>
  <IBU_METHOD>Tinseth</IBU_METHOD>
  <EST_ABV>6.11</EST_ABV>
  <EST_OG>1.058 sg</EST_OG>
  <EST_FG>1.011 sg</EST_FG>
  <OG>1.058</OG>
  <FG>1.011</FG>
  <PRIMING_SUGAR_NAME></PRIMING_SUGAR_NAME>
  <CARBONATION_USED></CARBONATION_USED>
  <CARBONATION>4.04</CARBONATION>
  <BF_PRIMING_METHOD></BF_PRIMING_METHOD>
  <BF_PRIMING_AMOUNT></BF_PRIMING_AMOUNT>
  <BF_CO2_LEVEL>4.04</BF_CO2_LEVEL>
  <BF_CO2_UNIT>Volumes</BF_CO2_UNIT>
  <URL></URL>
  <BATCH_SIZE_MODE>f</BATCH_SIZE_MODE>
  <YEAST_STARTER>false</YEAST_STARTER>
  <NO_CHILL_EXTRA_MINUTES></NO_CHILL_EXTRA_MINUTES>
  <STARTING_MASH_THICKNESS>2.7</STARTING_MASH_THICKNESS>
  <PITCH_RATE>1.5</PITCH_RATE>
  <FERMENTABLES>
   <FERMENTABLE>
    <NAME>Munich Type II (Dark)</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>4.5</AMOUNT>
    <YIELD>76.3</YIELD>
    <COLOR>9.9</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>Germany</ORIGIN>
    <DIASTATIC_POWER>40</DIASTATIC_POWER>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>Weyermann - Beech Smoked Barley</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>1.2</AMOUNT>
    <YIELD>70.3</YIELD>
    <COLOR>2.7</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>Germany</ORIGIN>
    <DIASTATIC_POWER>100</DIASTATIC_POWER>
   </FERMENTABLE>
   <FERMENTABLE>
    <NAME>DE - Bestmalz - BEST Vienna</NAME>
    <VERSION>1</VERSION>
    <TYPE>Grain</TYPE>
    <AMOUNT>0.4</AMOUNT>
    <YIELD>80.43</YIELD>
    <COLOR>4.2</COLOR>
    <ADD_AFTER_BOIL>false</ADD_AFTER_BOIL>
    <ORIGIN>Germany</ORIGIN>
    <DIASTATIC_POWER>250</DIASTATIC_POWER>
   </FERMENTABLE>
  </FERMENTABLES>
  <HOPS>
   <HOP>
    <NAME>Hallertau Mittelfruh</NAME>
    <VERSION>1</VERSION>
    <ALPHA>3.75</ALPHA>
    <AMOUNT>0.05</AMOUNT>
    <USE>Boil</USE>
    <USER_HOP_USE>Boil</USER_HOP_USE>
    <TIME>60</TIME>
    <FORM>Pellet</FORM>
   </HOP>
   <HOP>
    <NAME>Hallertau Mittelfruh</NAME>
    <VERSION>1</VERSION>
    <ALPHA>3.75</ALPHA>
    <AMOUNT>0.05</AMOUNT>
    <USE>Boil</USE>
    <USER_HOP_USE>Boil</USER_HOP_USE>
    <TIME>20</TIME>
    <FORM>Pellet</FORM>
   </HOP>
  </HOPS>
  <MISCS>
   <MISC>
    <NAME>Calcium Chloride (dihydrate)</NAME>
    <VERSION>1</VERSION>
    <TYPE>Water Agent</TYPE>
    <USE>Mash</USE>
    <TIME>60</TIME>
    <AMOUNT>0.005</AMOUNT>
    <AMOUNT_IS_WEIGHT>TRUE</AMOUNT_IS_WEIGHT>
   </MISC>
   <MISC>
    <NAME>Gypsum</NAME>
    <VERSION>1</VERSION>
    <TYPE>Water Agent</TYPE>
    <USE>Mash</USE>
    <TIME>60</TIME>
    <AMOUNT>0.003</AMOUNT>
    <AMOUNT_IS_WEIGHT>TRUE</AMOUNT_IS_WEIGHT>
   </MISC>
  </MISCS>
  <MASH>
   <NAME>Mash Steps</NAME>
   <VERSION>1</VERSION>
   <GRAIN_TEMP>20</GRAIN_TEMP>
   <MASH_STEPS>
    <MASH_STEP>
     <NAME>Protein rest. </NAME>
     <VERSION>1</VERSION>
     <TYPE>Temperature</TYPE>
     <STEP_TIME>20</STEP_TIME>
     <INFUSE_AMOUNT>16.5</INFUSE_AMOUNT>
     <STEP_TEMP>50</STEP_TEMP>
    </MASH_STEP>
    <MASH_STEP>
     <NAME>Starch conversion.</NAME>
     <VERSION>1</VERSION>
     <TYPE>Temperature</TYPE>
     <STEP_TIME>60</STEP_TIME>
     <INFUSE_AMOUNT></INFUSE_AMOUNT>
     <STEP_TEMP>67</STEP_TEMP>
    </MASH_STEP>
    <MASH_STEP>
     <NAME>Mash out.</NAME>
     <VERSION>1</VERSION>
     <TYPE>Temperature</TYPE>
     <STEP_TIME>15</STEP_TIME>
     <INFUSE_AMOUNT></INFUSE_AMOUNT>
     <STEP_TEMP>77</STEP_TEMP>
    </MASH_STEP>
    <MASH_STEP>
     <NAME></NAME>
     <VERSION>1</VERSION>
     <TYPE>Infusion</TYPE>
     <STEP_TIME></STEP_TIME>
     <INFUSE_AMOUNT>17.9</INFUSE_AMOUNT>
     <STEP_TEMP>77</STEP_TEMP>
    </MASH_STEP>
   </MASH_STEPS>
  </MASH>
  <YEASTS>
   <YEAST>
    <NAME>LalBrew Diamond Lager</NAME>
    <VERSION>1</VERSION>
    <TYPE>Lagers</TYPE>
    <FORM>Dry</FORM>
    <AMOUNT>0.33</AMOUNT>
    <AMOUNT_IS_WEIGHT>TRUE</AMOUNT_IS_WEIGHT>
    <PRODUCT_ID></PRODUCT_ID>
    <LABORATORY>Danstar</LABORATORY>
    <ATTENUATION>80</ATTENUATION>
    <FLOCCULATION>High</FLOCCULATION>
    <MIN_TEMPERATURE>10</MIN_TEMPERATURE>
    <MAX_TEMPERATURE>15</MAX_TEMPERATURE>
   </YEAST>
  </YEASTS>
  <WATERS>
   <WATER>
    <NAME>Light colored and malty</NAME>
    <VERSION>1</VERSION>
    <AMOUNT>23</AMOUNT>
    <CALCIUM>73.3</CALCIUM>
    <BICARBONATE>40</BICARBONATE>
    <SULFATE>55.9</SULFATE>
    <CHLORIDE>80.5</CHLORIDE>
    <SODIUM>10</SODIUM>
    <MAGNESIUM>3</MAGNESIUM>
    <NOTES></NOTES>
   </WATER>
  </WATERS>
  <STYLE>
   <NAME>Rauchbier</NAME>
   <VERSION>1</VERSION>
   <CATEGORY>Amber Malty European Lager</CATEGORY>
   <CATEGORY_NUMBER>6</CATEGORY_NUMBER>
   <STYLE_LETTER>B</STYLE_LETTER>
   <STYLE_GUIDE>BJCP</STYLE_GUIDE>
   <TYPE>Lager</TYPE>
   <OG_MIN>1.05</OG_MIN>
   <OG_MAX>1.057</OG_MAX>
   <FG_MIN>1.012</FG_MIN>
   <FG_MAX>1.016</FG_MAX>
   <ABV_MIN>4.8</ABV_MIN>
   <ABV_MAX>6</ABV_MAX>
   <IBU_MIN>20</IBU_MIN>
   <IBU_MAX>30</IBU_MAX>
   <COLOR_MIN>12</COLOR_MIN>
   <COLOR_MAX>22</COLOR_MAX>
  </STYLE>
 </RECIPE>
</RECIPES>
